Autel Battery and Electrical System Analysis Tester MaxiBAS BT506 is a battery and electrical system analysis tool that uses as Adaptive Conductance an advanced battery analysis method, to produce a more accurate examination of the battery’s cold cranking ability and reserve capacity, vital to determining a battery’s true health. The BT506 enables technicians to view the health status of the vehicle's battery and electrical system. Download the free and easy-to-use mobile app, available for iOS and Android devices, to use with the BT506 to perform testing and display test results. Support for MaxiSys Ultra MS919 MS909 MS908 MS906 Series.
Highlights:
1. All the following Autel Tablets support Battery Test via work with BT506:
MK808BT,MK808BT PRO,
MK808Z-BT, MK808K-BT,MK900-BT, MX808TS, MX808S-TS, MX900-TS, MK808TS, MK808S-TS,
MK808Z-TS,
MK900-TS, DS808S-BT, DS808TS,
DS808S-TS, MP808TS, MP808S-TS,
MP808Z-TS,
MP900-TS, MP808BT, MP808BT Pro,
MP900-BT,
MP900Z-BT, MS906S, MS906TS, MS906BT, MK906BT,
MS906 Pro, MS906 PRO-TS,
MK906 PRO, MK906S Pro,
MK906 Pro-TS, MK906S Pro-TS, MS908S Pro, MS908S II,
MS908S PRO II,
MK908 II,
MK908 PRO II, MaxiSys Elite,
MaxiSys Elite II,
MaxiSys Eltie II Pro,
MS909, MS919,
Ultra,
Ultra Lite.
2. Support in-vehicle and out-of-vehicle testing of passenger vehicle batteries
3. Test 6- and 12-volt batteries: 100 - 2000 CCA
4. Test 12- and 24- cranking/charging systems
5. Test Flooded, AGM, AGM Spiral, EFB and GEL batteries
6. Compatible with CCA, CA, SAE, EN, IEC, DIN, JIS and MCA
BT506 Description:
The BT506 does not have a screen! To perform testing and display test results the BT506 must be used with an Autel MaxiSys tablet or other smart devices (free iOS or Android apps available).
AUTEL MaxiBAS BT506 is a battery and electrical system analysis tool that enables technicians to view the health status of a vehicle's battery and electrical system. It is not an average battery tester because it measures not only the state of charge but also the battery state of health including its capacity, its ability to maintain and store energy. Using adaptive conductance (an advanced battery analysis method), AUTEL MaxiBAS BT506 can produce a more accurate examination of the battery's cold cranking ability and reserve capacity, which is vital to determine a battery's true health.
Tip: click
here to free download BT506 User Manual.
Free Download Autel-MaxiBAS-comparison-chart. PDF, click
here.
Download Free App from Google Play and the App Store
The BT506 is a new app-based battery analysis tool developed by Autel.
Download the free and easy-to-use mobile app, available for iOS and Android devices, and use it with the BT506 to perform testing and display test results.
BT506 has positive and negative alligator clamps which are polarity protected, so even if you reverse the clamps and put the negative on the positive terminal, it is OK. In fact, the LED on the tester is color coded to alert the users of connection and testing status, so the testers will flash red to alert you that you have made the error.
Battery Health Report / Temperature Compensation / Cloud-based Service
Battery Ratings: CCA, CA, MCA, JIS, DIN, SAE, IEC, EN, EN2, BCI, GB
Test Flooded, AGM, AGM_Spiral, EFB, and GEL Batteries
In-vehicle testing of Battery, Starter, Charging system voltage (not amps)
Out-of-vehicle Battery testing
Test 6- and 12-volt Batteries: 100 - 2000 CCA
Test 12- and 24-volt Cranking/Charging Systems
Cranking And Charging System Test
BT506 Battery Tester can test battery and also 12- and 24-volt Cranking/Charging Systems( starter and alternator), Same as BT608.
1. In-Vehicle Test:
* Battery Test:
With the clear guidance on the screen, you can do the battery test. And the battery test results include a color-coded result summary, a list of test data such as SOC, Voltage, Measure Capacity, and repair tips.
Starter Test: Follow the on-screen instructions, start the engine and let it idle. Then the test results of the cranking system will be displayed on the screen which including starting voltage, starting current and starting time.
* Generator Test:
Through the alternator test, technicians can check the load voltage/current, no load voltage/current, and ripple. The direct test result on the screen will tell you whether the charging is normal and whether there is an issue with the output or ripple, which helps avoid damaging the battery and shortening its life due to overcharging or incomplete charging.
2. Out-Vehicle Test:
Out-vehicle test is used to test the condition of batteries that are not connected to a vehicle. This function aims to check the health status of the battery only.
3. Automatically Identify Battery Type:
Clamp the BT506 to an in-vehicle battery, the vehicle information will be automatically populated and its battery information tab will pop up from the bottom of the screen, select the correct battery parameters on the screen to process the diagnosis.
* BatteryTypes: FLOODED, AGM, AGM SPIRAL, EFB, and GEL;
* Standards: CCA, SAE, CA, EN, IEC, DIN, JIS and MCA.
BT506 vs. BT508 vs. BT608 vs. BT609 Comparison
Item |
Autel BT506 |
Autel BT508 |
Autel BT608 |
Autel BT609 |
Software |
Operating System |
× |
× |
Android 9.0 |
Android 9.0 |
Hardware |
Screen |
× |
× |
5.5-inch touchscreen/ 720*1280 |
7.0-inch touchscreen/ 1280*800 |
Processor |
Cortex-M4 |
Cortex-M4 |
Cotex-A35 Quad-core, 1.5Ghz |
Cotex-A35 Quad-core, 1.5Ghz |
Memory/RAM |
× |
× |
32GB/2GB |
64GB/2GB |
Battery |
× |
× |
3000mAh, 6H |
6000mAh, 6H |
Camera |
× |
× |
8mp |
8mp |
Features |
CCA Range |
100-2000 CCA |
100-2000 CCA |
100-3000 CCA |
100-3000 CCA |
Battery Type |
Flooded, AGM, AGM Spiral, EFB, GEL |
Flooded, AGM, AGM Spiral, EFB, GEL |
Flooded, AGM, AGM Spiral, EFB, GEL |
Flooded, AGM, AGM Spiral, EFB, GEL |
Battery Ratings |
CCA, CA, MCA, JIS, DIN, SAE, IEC, EN, EN2, BCI, GB |
CCA, CA, MCA, JIS, DIN, SAE, IEC, EN, EN2, BCI, GB |
CCA, CA, MCA, JIS, DIN, SAE, IEC, EN, EN2, BCI, GB |
CCA, CA, MCA, JIS, DIN, SAE, IEC, EN, EN2, BCI, GB |
Battery Voltage |
6V, 12V |
6V, 12V |
6V, 12V |
6V, 12V |
Electrical System |
12V, 24V |
12V, 24V |
12V, 24V |
12V, 24V |
Voltage Range |
1.5V-36V |
1.5V-36V |
1.5V-36V |
1.5V-36V |
Temperature Compensation |
√ |
√ |
√ |
√ |
Battery Registration |
× |
53 vehicle makes |
53 vehicle makes |
53 vehicle makes |
Electrical Reset |
× |
√ |
√ |
√ |
System Detection |
× |
AutoVIN |
AutoVIN, VINScan, Plate Scan |
AutoVIN, VINScan, Plate Scan |
Battery Location Diagrams |
√ |
√ |
√ |
√ |
Battery Health Report |
× |
√ |
√ |
√ |
Built-in Printer |
× |
× |
√ |
× |
Email Report |
√ |
√ |
√ |
√ |
Cloud-base Service |
√ |
√ |
√ |
√ |
Multimeter |
× |
× |
Optional |
Optional |
Amp Clamp |
× |
× |
Optional |
Optional |
Diagnostics |
All System Diagnostics With AutoSCAN |
× |
√
(One vehicle brand ONLY) |
√ |
√ |
All Maintenance Service Resets |
× |
× |
× |
√ |
Diagnostic Software Update |
× |
Change for additional vehicle brands and annual update |
No annual update fee |
Annual update fee |
Specification:
Item |
Description |
Connectivity |
USB 2.0, Type C |
Bluetooth V3.0 BR/EDR+ V4.2 LE Dual-Mode |
Input Voltage |
5 V DC |
Working Current |
< 150 mA at 12 V DC |
Internal Battery |
N/A |
CCA Range |
100 to 2000 A |
Voltage Range |
6 to 36 V |
Working Temperature |
-10°to 50° C (14° to 122° F) |
Storage Temperature |
-20° to 60° C (-4° to 140° F) |
Dimension (L x W x H) |
107 mm (4.21“) x 75 mm (2.95”) x 26 mm (1.02”) (clamp cable not included) |
Weight |
320 g (0.7 lb.) |
Package includes:
1pc x MaxiBAS BT506 Unit with Battery Cable (Approx 2-FT Long) with Large Clamps (Low Profile) and Temperature Sensor