Autel KM100 Program 2022 Hyundai Tucson All Keys Lost

Autel KM100 Program 2022 Hyundai Tucson All Keys Lost
Autel MaxiIM KM100 Key Fob Programming Tool can successfully program 2022 Hyundai Tucson(NX4) all keys lost by OBD. Besides it can also read passwords for keyless systems. Detailed support list please refer to the chart below:

KM100 Hyundai TUCSON(NX4) IMMO List
Year System Add key All keys lost Read password Remote learning
2022 Immobilizer √(by OBD) √(by OBD) × √(by OBD)
2022 Keyless system √(by OBD) √(by OBD) √(by OBD) Not required
2023- Immobilizer √(by OBD) √(by OBD) × √(by OBD)
2023- Keyless system √(by OBD) √(by OBD) × Not required

  1. Generate Key
Universal key >> Europe >> Hyundai >> TUCSON(NX4) >> Hyundai TUCSON(NX4) 2022-2022 >> Generate universal key
Put an Autel IKEY Remote into KM100 key slot...
  1. Program All Keys Lost
Plug V200 VCI into the OBD interface.
IMMO >> Hyundai >> TUCSON(NX4) >> 2022- >> Smart key >> Yes >> Immo status scan >> All keys lost(guided) >> Start

This function supports adding keys and all keys lost.
Performing this function will erase all existing keys, all the old keys must be relearned again to be able to use normally.
Press "Yes" to continue.

Turn the ignition off. (Note: the screen of the instrument is black.)
Open and then close the driver's door once!
Please enter the 6-digit security code on Autel KM100.

Note! Click "OK" to complete the following steps:
Within 5s after OK is pressed, use the back or top of the smart key to hold down the START button for 5s until the anti-theft lamps flash.
(If the operation failed with the prompts, please remove the key case and re-execute the above steps so that the key chip can be successfully programmed.)

Programming succeeded.

Test the new key, it does work normally.